Offer

#

Metal Scrap Recycling
Vehicle Recycling

 

 LLC LP «WTÓRMEX» runs business related to metal scrap recycling. We buy metal scrap from both legal entities and natural persons. The offer includes possibility of metal scrap pick up by our transport.
 At the same time we deal with vehicle recycling /cars disassembling/. We issue all necessary documents to  deregister a motor vehicle in the corresponding Vehicle  Registration Centre and Insurance Agency. Our offer  includes buying of electric engines in aluminium housing, washing machine engines, starters, alternators, rotors, oil-free refrigerant units.
 
 We are looking forward to cooperating with You.

 

 

METAL SCRAP RECYCLING
VEHICLE RECYCLING
Phone: +48 602 625
Fax: +48 44 683 54 31

Metal scrap warehouse
Stobiecko Szlacheckie
Phone: +48 602 347 896



 

 

 

 

 

 

 

 

 

 

 

 

#

Liquid Fuel Recycling

Liquid Fuel Recycling 

    Multi-activity enterprise LLC LP “WTÓRMEX” carries on activity connected with liquid fuel recycling, whole sale and retail sale.

We deliver fuel by our own transport.

We look forward to cooperating with You.

LIQUID FUEL RECYCLING
Sales department
Sales Department Manager
Marcin Zbroja
Phone: +48 44 683 54 00 intern. 21
Cell phone: 668 822 630
Fax: +48 44 683 54 31
marcin.zbroja@wtormex.com.pl

 


 FUEL STATION PŁAWNO
ul. Gidelska 61
97-540 Gidle
tel. +48 34 327 21 53

 FUEL STATION RĘKORAJ
Rękoraj 28
97-310 Moszczenica
tel. +48 44 616 02 38

 FUEL STATION ŁADZICE
ul. Wyzwolenia 91
97-561 Ładzice
tel. +48 44 788 64 52
 

 


 FUEL STATION WYGODA
Wygoda 1
97-371 Wola Krzysztoporska
tel. +48 44 649 91 99

 FUEL STATION FAŁKÓW
ul. Spacerowa 2a
26-260 Fałków
tel. +48 44 787 36 19

 FUEL STATION KLUKI
Kluki 114
97-415 Kluki
tel. +48 44 631 54 68

 

 

 


FUEL STATION STOBIECKO SZLACHECKIE
Stobiecko Szlacheckie 29
97-561 Ładzice
tel. tel. +48 44 682 16 50

 

 

 

 

 

#

Iron Foundry

#

Mechanical treatment

Mechanical treatment 

 Mechanical Treatment Department of our company invites You for cooperation in edge cutting machining and assembling. 

We offer precision and quality of the highest level. We implement complex orders of Customers. We offer consultations on structural and technological optimization, selection of materials and their finishing. 

- turning up to 2000х1000 
- turning up to 500x3000 
- turning on lathe CNC up to 400x1500 
- milling on horizontal and vertical milling machines, maximum dimensions: 
   Length 2800 
   Width 900 
   Height 800 
- milling of gears to module 14 
- boring on boring machines: table size 1200х1200 
- grinding of surfaces maximum size up to. 350х1200
- grinding of rollers up to  250х900 
- grinding of holes up to 300x250 
- laser cutting of metal plates, maximum thickness 10; table size 1500x3000 
- boring with jig boring machine; table size 650x1200 

  If order scope  in some extent exceeds our production capacity, we will do our best in order to implement order with our partners and friendly companies.

 

At the same time we deal with vehicle recycling /cars disassembling/. We issue all necessary documents to  deregister a motor vehicle in the corresponding Vehicle  Registration Centre and Insurance Agency. Our offer  includes buying of electric engines in aluminium housing, washing machine engines, starters, alternators, rotors, oil-free refrigerant units.

METAL SCRAP RECYCLINGVEHICLE RECYCLINGPhone: +48 602 625Fax: +48 44 683 54 31

Metal scrap warehouseStobiecko SzlacheckiePhone: +48 602 347 896

Multi-activity enterprise LLC LP “WTÓRMEX” carries on activity connected with liquid fuel recycling, whole sale and retail sale.
We deliver fuel by our own transport.
We look forward to cooperating with You.
Contact detailsLIQUID FUEL RECYCLING Sales departmentSales Department ManagerMarcin ZbrojaPhone: +48 44 683 54 00 intern. 21Cell phone: 668 822 630Fax: +48 44 683 54 31marcin.zbroja@wtormex.com.pl

General information
 Foundry
 Production
 Quality control
Machinery and Automotive Industry 
 Range of services
Fittings
 Pipping and plumbing fittings
 Commercial terms
 Price-list July 2015
 Catalogue Foundry  2015
Quality
 Quality policy
 ISO certificate
Certificates of  conformity / declarations
 Hygiene certificate
 Declaration of conformity




Foundry was founded in 1941 and was specialized in   production of grey cast iron for needs of  industrial and  agricultural machinery. As the result of privatization foundry became part of  Drive Axle Factory and was producing castings for factory needs. In  1998 Foundry became part of multi-activity enterprise WTÓRMEX.
Within the framework of reorganization Foundry started production of ductile iron details and also extended offer of piping and plumbing fittings becoming in such a way a manufacturer of these parts. Decades of experience and also deep knowledge in foundry production together with modernization of foundry production enable continuous development satisfying requirements of customers. Our products are presented on the national market and a great part is also exported to such countries as Germany, Austria, Italy, Croatia, Serbia, Slovakia, Ukraine, Latvia, Belarus, Ukraine. At the present moment we produce piping and plumbing fittings for machinery and automotive industry. We implement also orders from individual customers. We are able to make individual detail and mass production. We offer finished products after mechanical and rustproofing treatment. 
Since 2010 we have Quality Certificate for compliance with all requirements of ISO 9001:2008. Due to it we are able to continuously improve production process, develop all other processes within organization, upgrading quality level of our products and services. We also remember about Environment Protection and take care about all aspects in this direction. 
We are grateful for Your interest, You are welcomed to get acquainted with our offer.


Foundry produces ductile iron casts according to PN-EN
1563 of the following grades:
EN-GJS 400-15     |     EN-GJS 400-18     |     EN-GJS 450-
10     |     EN-GJS 500-7
Our production capacity is about 100 tons of castings monthly. We produce castings weighting up to 1500 kg. Production range includes 2000 positions.
Production includes the following processes:
Pattern workshop
We have our own pattern workshop, due to which we are able to make patterns and their modifications on the basis of received documents and samples. Patterns are made of wood or resin.
Moulding workshop
We produce castings in moulding machines/ blow-squeeze machines; impulse moulding machines/, and also manually. Moulds are done from classic mixtures with addition of bentonite mixtures and also thermoset materials.

Melting workshop
Cast iron melting is done on the basis of cupola process enriched with heated blast and direct injection of oxygen. Annealing is done with the help of beam method.
Cleaning workshop
Castings after extraction are cleaned with shot blasting and grinding methods. 
Mechanical treatment
Foundry implements orders for production castings after mechanical treatment. Mechanical treatment in foundry includes: turning, milling, boring. We can offer finishedproducts after precise mechanical treatment.
Company has mechanical treatment plant within its structure /tag: Mechanical Treatment Department/.
Thermal treatment
We carry out thermal treatment in chamber and pot furnaces under temperatures about 1000 оC. Our capabilities include the following thermal treatment procedures: stress-relief annealing, soft annealing and normalizing annealing.    
Paint workshop
Foundry has two paint workshops. Workshop for painting machine castings with primer / rust inhibitive primer/ and workshop for powder painting where piping and plumbing fittings are covered with protective coating of powder painting on the basis of epoxide resin. 
Leakage testing of castings
Piping and plumbing fittings are tested for leakages. 
Quality control
Quality control includes testing of castings in terms of material and dimensional requirements.



Foundry has its own laboratory for metal testing which allows to carry out the following tests: 
- mechanical tests: Rm; A5; Re; Rp0,2
- hardness tests: HB; HV; HR 
- metal micrographic tests
- spectrochemical analysis ARL
- dimensional control of castings
On the request of customers we issue Certificates of Conformity for materials/agreed with the receiver/, and also Declaration of Conformity.  
Quality control is done on all stages of production. All materials used in production come from qualified suppliers, that is confirmed by corresponding certificates of conformity or quality certificates.  
In case of piping and plumbing fittings, leakage test, measurement paint coating thickness and its adhesion to basis are additionally carried out.

MACHINE CASTINGS
Foundry also produces castings from ductile iron for machine and automotive industry. Our production includes also such items as drive axle cases, hubs, anchors, brake discs, housings, supports, lids, pulleys and gears. 
We can offer castings after thermal and mechanical treatment/ both initial treatment and finished product treatment. We produce casting in accordance with presented documents/ we have pattern workshop/ modelling patterns.
If you are interested in our offer, send you requests on the e-mail: odlewnia@wtormex.com.pl



Foundry is producer of piping and plumbing fittings from ductile iron according to standards  PN-EN 1563 
Offered by us fittings are of our own production (casting, mechanical treatment, coating).
Products meet standards requirements, have corresponding Hygiene Certificates of National Institute of Hygiene for contact with drinking water for all applied coatings. Our products are thoroughly tested in the laboratory (chemical composition analysis, strength test and microstructure analysis). Precise control on each stage of production (dimensional control, leakage test, thickness of coating and its adhesion to basis) allow producing the highest-quality product. 
Conformity with standards requirements is proved by issuing Declaration of Conformity, and on additional request we issue Quality Certificate for the range agreed with the Customer.  
Fittings are covered with protective layers in the following variants:
1 completely powder coated with paintings on the basis of epoxy resin - RAL 5005
2  concrete laying inside fitting, painting with bituminous paint outside (black colour)
3 Completely coated with  bituminous paint (black colour)
Fittings are made for nominal pressure
Additionally we produce pipes with flanges for the length from  1000 to 6000mm. Pipes diameter range is PN 10; PN 16; PN 25; PN 40from DN80 to  DN600 
Our offer of fittings you can find in our price-list, available on our webpage. There are no exclusive (single) products with characteristics requested by the Customer in our price-list. Price-list was created earlier, that’s why it can miss information about products which we introduced after issuing catalogue. If you cannot find necessary product, please, contact us.


GENERAL COMMERCIAL TERMS AND CONDITIONS
We present selected terms of sales and commercial cooperation. 
Price offer
Multi-activity enterprise LLC LP “WTÓRMEX” sells products at the prices indicated in the current price-list. Prices can be changed and we always inform Customer about these changes before accepting the order. Depending on order quantity and turnover with Patrons, discount is possible and is agreed with the Customer individually.
Purchase orders
Purchase orders must be issued only in written form/ fax, e-mail/.
Correct purchase order must contain the following information :
- marking /in accordance with the catalogue/
- pressure PN /10; 16; 25; 50/
- coating variant: inside concrete laying, outside bituminous painting; epoxy resin coating; bituminous coating; 
- product quantity
- agreed lead time
- delivery address 
 -delivery terms /form of shipment: own transport, forwarding company/
- contact person – name and surname, telephone number, e-mail of the Customer 
Purchasing order which contains all above-mentioned information allows us to start its implementation without additional agreements and shortens lead time. 
Delivery terms, transport
Delivery of products is done at the expense of Customer. Form of shipment/ own transport, forwarding company/ is defined by the Customer and must be written in the purchase order.  
Payment terms
Payment terms are determined individually for each Customer. Delay payment is possible only for Customers who satisfy predetermined requirements. Detailed and not mentioned above commercial conditions must be discussed on the stage of purchasing request and agreements between parties. 
WE ARE LOOKING FORWARD TO COOPERATING WITH YOU



Mechanical treatment
Mechanical Treatment Department of our company invites You for cooperation in edge cutting machining and assembling.
We offer precision and quality of the highest level. We implement complex orders of Customers. We offer consultations on structural and technological optimization, selection of materials and their finishing. 
- turning up to 2000х1000
- turning up to 500х3000
- turning on lathe CNC up to 400x1500
- milling on horizontal and vertical milling machines, maximum dimensions: Length 2800Width 900Height 800
- milling of gears to module 14
- boring on boring machines: table size 1200х1200
- grinding of surfaces maximum size up to. 350х1200
- grinding of rollers up to  250х900
- grinding of holes up to 300x250
- laser cutting of metal plates, maximum thickness 10; table size 1500x3000
- boring with jig boring machine; table size 650x1200
If order scope  in some extent exceeds our production capacity, we will do our best in order to implement order with our partners and friendly companies.























#

Steel Profiles
Window Reinforcements

We produce steel profiles, namely window reinforcements. In our offer you can find window reinforcements for all basic window systems presented in Poland, such as Veka, Aluplast, Decco, Deceuninck, Gealan, KBE, Rehau, Salamander and others in accordance with documents presented by the Customer. All products are made in accordance with Polish Standards. We guarantee high quality of our products and competitive prices.